Already split 'em and put them back together.
Fork is fine. Springs are springy. Only wear is on the shaft where the second gear moves up and down. Smoothed it out so the gear moves freely. Nothing is binding.
Looks like low mileage on everything.
Clutch discs look perfect.
Lever on engine is tight, but moves freely. Tight because it's not worn out.
Only gear I can find is second. It'll click in and out smooth from neutral. If I kick up and hold it, first gear will engage.
Third is nowhere to be found.
Everything reassembled the way it's supposed to be, according to the exploded view. All shims, gears, etc in the proper place, double and triple checked.
Tried adjusting the lock screw on the clutch plates, and the cable tension.
It's the same clutch disc set-up as the Minarelli P4 and 6, so I'm familiar with adjusting the clutch tension, how the plates stack, etc.
Plates move when clutch is pulled. When in second, pulling the clutch neutralizes it. Nothing seems to be binding.
Gonna keep fucking with it tomorrow.