MOPED ARMY

The axhilarator pedal and steering is like butter

The linkage worked out good, aluminum sheets of firewall and patch panels.

jesus hw this is some good shit!

this fall/winter i'm gonna build a gator-like thing out of an old mower, but do it kinda cab-over style.

it would be really nice to have a little dump bed i can haul shit around the farm like wood or bags of feed, something the kids can drive and not too fast but lots of torque to haul heavy shit up hills.

i got a 16 hp hydro Yard Man tractor that pooped the sheets on me earlier this year. pretty stoked!

basically what this guy did

http://edsmetalcreations.blogspot.com/2010/02/homemade-utility-vehicle.html

Hacked F150 bumper fills the space below the hood.

I moved the steering over to drivers side with a couple moped sprockets

The swing arm drops off with the removal of a pin on each side.

Hacked the mower hubs to bolt into a set of atv wheels.

yep. u r truly batshit cray.

or squirrelshit?

Hey babe can I mow your grass?

I have to wonder what the squirrel thinks.

Love the Squirl. Love all wild life.

Creatures are far more intelligent than we give them credit for.

Or rather we humans think we are the only one with feelings, emotions or intellect.

I actually just scored one of those Razor scooters and I was looking at the mounts and thinking about making a friction drive for a kid's toy but hate most people don't know squirrels are snake proof a squirrel will never get eaten by a snake because that Twitchy tail confuses a snake so much they avoid squirrels thinking that they are a hawk or a bigger snake

I hear u can fill an air tank and with a compressor ?!?

Problem is, that is not an air tank it is an Oxygen tank. Air is a majority Nitrogen mixture (only about 21% Oxygen). So if your using that on a torch set up it will not work properly. ALso, oxygen tanks are usually filled between 2000-2640 psig, so your air compressor putting out 150 max psig will not put much in. My advice, just pay to have your Oxygen tank filled and make sure not to have grease or any oil based products (telfon tape, etc) on anything oxygen.

Now, with that out of the way please tell me you have a Youtube channel. Your stuff its dope, and Im sure you could make money on youtube showing your builds.

Should I call it a V6 ?

nice!

my mower cart project is on the back burner for a few more months, camper now, then back to the boat, then rebuilding my subaru engine, then ahhh, maybe the brat? gotta get the 3 point working on the tractor and re-work the loader bucket, redo the hydraulic system before snow flies, maybe work on some mopeds and motorcycles in there somewhere... then lawn tractor cart? i dunno.

Check out the peerless 7 speed transmission my buddy brought over. I’ll swap the pulley to a smaller diameter then bolt it under the little snapper mower. weeee!

Popped the cap, yup it’s a 6 speed.

The crud was so etched in the cases, I used a descaler air tool to chisel it clean. Baked on oily grass crap. Got it clean tho, then scrubbed gasoline and paint thinner. Good enuff, The dirty part is contained so I don’t have to wash my hands 80 times ya know,

The original pulley is 8” like a moby pulley, ditched that for a 5” pulley.

Only problem is it don’t fit without moving the axle mounts,,, again! :) then I’ll have to move the motor back so the pulleys don’t collide.