Re: Heating case halves with new seals for crankshaft install per M48 rebuild wiki.

♣Slew Foot♣ /
This single post is part of a larger thread. Start from the top or view this post in context.

I cheat and use an oven to heat the halves to 375f just the halves..

I use a jig to set the bearings and seals on the crank and check true and have the spacing right.

I Also have 4 extra long case bolts. Torque it like a head with the paper gaskets and use some Indian head shellac on the intake and base of Reedblock port.

This single post is part of a larger thread. Start from the top or view this post in context.

Want to post in this forum? We'd love to have you join the discussion, but first:

Login or Create Account