Re: MLM Bearing Puller

Brandon Weiss (Detective brandon to you) /
This single post is part of a larger thread. Start from the top or view this post in context.

It's actually a very useful tool, not a waste. The bearings could have just as easily come out still attached to the crank, and then you would have been happy to have it. I use mine all the time.

Just heat the case with a torch around the bearing for 30 seconds or so and tap it out with a hammer and a punch.

This single post is part of a larger thread. Start from the top or view this post in context.

Want to post in this forum? We'd love to have you join the discussion, but first:

Login or Create Account