! Congrats!

Don Ohio /
This single post is part of a larger thread. Start from the top or view this post in context.

> John Lusignan Wrote:

> -------------------------------------------------------

> Thanks everyone! It was the drive bearing. It wasn't seated all the

> way. I put a few shop rags on top of it and then used a pine 2x4 and a

> 4lb sledge to take about 5-6 good whacks at it. I had measured with the

> calipers and it moved about .5mm down into the seat. bolted the cases

> back together and that did the trick! Thanks again!

Good job! Congrats!

This single post is part of a larger thread. Start from the top or view this post in context.

Want to post in this forum? We'd love to have you join the discussion, but first:

Login or Create Account