If it was as stock setup I would say that the needle clip should be raised 1 notch to lean out the 1/4 - 3/4 throttle position. But as mentioned, getting a real Bing 14 should do it. There is a wiki somewhere that tells how to derestrict tbe pipe and what jets to use.
Re: JCP Swinger 2 timing and results
This single post is part of a larger thread. Start from the top or view this post in context.
This single post is part of a larger thread. Start from the top or view this post in context.
Subject | Written By | Posted |
---|---|---|
JCP Swinger 2 timing and resultsTopic by: Mike Pavlik | Mike Pavlik | 07/24/20 12:54AM |
Re: JCP Swinger 2 timing and resultsRe: Jay Rivett | Jay Rivett | 07/24/20 01:51AM |
Re: JCP Swinger 2 timing and resultsRe: Mike Pavlik | Mike Pavlik | 07/29/20 12:08AM |
Re: JCP Swinger 2 timing and resultsRe: Mark Kinsler | Mark Kinsler | 07/29/20 12:27AM |
Re: JCP Swinger 2 timing and resultsRe: Mike Pavlik | Mike Pavlik | 07/29/20 12:54AM |
Re: JCP Swinger 2 timing and resultsRe: Overpriced Parts | Overpriced Parts | 07/29/20 01:24AM |
Re: JCP Swinger 2 timing and resultsRe: Mike Pavlik | Mike Pavlik | 07/29/20 01:08PM |
Re: JCP Swinger 2 timing and resultsRe: Pushrod Fifty | Pushrod Fifty | 07/29/20 02:28PM |
Re: JCP Swinger 2 timing and resultsRe: Jay Rivett | Jay Rivett | 07/29/20 07:33PM |
Re: JCP Swinger 2 timing and resultsRe: Mike Pavlik | Mike Pavlik | 07/29/20 09:07PM |
Want to post in this forum? We'd love to have you join the discussion, but first: