Re: Replaced condenser on Bravo, now it won't run

Nick Johnston /
This single post is part of a larger thread. Start from the top or view this post in context.

Ok I opened up the magneto, here are pictures of the condenser. I didn't solder it in, just screwed on the wire connection. The blue ignition ground wire was a bit wrecked so I connected a new wire (under the blue electrical tape).

IMG_0044.jpg
IMG_0045.jpg
IMG_0046.jpg
This single post is part of a larger thread. Start from the top or view this post in context.

Want to post in this forum? We'd love to have you join the discussion, but first:

Login or Create Account