Re: Snowflake Disc Brake - DIY w/PICs

Eds Moped Shop - Dead Possums /

This is in the wiki. You can save the link there.

Re: Snowflake Disc Brake - DIY w/PICs

Baron Von Hamilton /
60355183-837D-4A35-9D52-1D5BA1E983C5.jpeg

Helped me with this turd

C8234E58-9CFF-4D9C-BCE2-6D79EF905F31.jpeg
AB21116D-2B70-42D6-BB90-E56FE9387EBA.jpeg

And dual disks for this turd.

Re: Snowflake Disc Brake - DIY w/PICs

Charles Cole (OFMC) /

I'll bet that stops real nice!

Re: Snowflake Disc Brake - DIY w/PICs

Baron Von Hamilton /

> Charles Cole (OFMC) Wrote:

> -------------------------------------------------------

> I'll bet that stops real nice!

It does. It was a pain in the ass to get everything lined up, but in the end it was worth it.

Re: Snowflake Disc Brake - DIY w/PICs

> Baron Von Hamilton Wrote:

> -------------------------------------------------------

> >

> Helped me with this turd

>

> And dual disks for this turd.

does that macho have a rear foot brake?!

Snap into a fucking AWESOME

Re: Snowflake Disc Brake - DIY w/PICs

Charles Cole (OFMC) /

Some close up pix would be nice.

Re: Snowflake Disc Brake - DIY w/PICs

Baron Von Hamilton /

I had a small build thread on the bike.

https://www.mopedarmy.com/forums/read.php?7,4186277,4189966,page=2#msg-4189966

The rear brake was a pain in the ass, but worth it in the end.

F42E846A-7CEE-49EC-A7FE-93CA1951AA82.jpeg
036B6A9B-0033-4069-AFA1-C0F02AB3A830.jpeg

I’ll take a couple better ones when I pull the bike out later.(edited)

Re: Snowflake Disc Brake - DIY w/PICs

Ungapped rings to bind them all /

Nice!

Re: Snowflake Disc Brake - DIY w/PICs

Dirty30 Dillon /

I am building a grande-based bike that needed a front snowflake disk, so naturally I wanted to try this.

We able to find a 220mm rotor that fits the GM idler pulley perfectly. Now I have to just press everything together.

1518x2024.jpeg

Re: Snowflake Disc Brake - DIY w/PICs

todd amundson /

Wheres that rotor from?

Re: Snowflake Disc Brake - DIY w/PICs

Dirty30 Dillon /

Whoops, I lied, it's 260~mm

https://www.ebay.com/itm/362147933690

Re: Snowflake Disc Brake - DIY w/PICs

todd amundson /

Thanks thought so. This is the biggest one iv'e found that has a small enough bolt circle for mounting. It's actually perfect. Don't tell anybody else.

Re: Snowflake Disc Brake - DIY w/PICs

Baron Von Hamilton /

That is a nice rotor! Hands down best mod to a moped. Something about being able to stop is awesome.

Re: Snowflake Disc Brake - DIY w/PICs

Dirty30 Dillon /

> Baron Von Hamilton Wrote:

> -------------------------------------------------------

> That is a nice rotor! Hands down best mod to a moped. Something about

> being able to stop is awesome.

I was just gonna "get by" with snowflake drums, but I really want to be able to stop this grande/sacre project which will actually require brakes unlike most of my mopeds.

Re: Snowflake Disc Brake - DIY w/PICs

we gonna wiki this?

Re: Snowflake Disc Brake - DIY w/PICs

kevin Smellaflange /

the new guru...

there should be a special certificate... or a tax write off benny...or somethin'...great job

« Go to Topic — end of thread

Want to post in this forum? We'd love to have you join the discussion, but first:

Login or Create Account