Re: Rotary valve Peugeot Spx

Rocco Taco Wrote:

-------------------------------------------------------

> Brandon Weiss (aka B-Man) Wrote:

> --------------------------------------------------

> -----

> > So iv'e gone through all 22 pages today, when

> will

> > we see this thing on the road? How fast is it?

> >

> > I'm super curious and wanna know a 0-60mph time

> > too haha

>

>

> Fuck it I wanna see it run too, put some reeds in

> it and call it done. Lol

Anyone can do that, it would defeat the point of this thread. Alex is a wizard at his craft

Re: Rotary valve Peugeot Spx

Ben Whittle Wrote:

-------------------------------------------------------

> Anyone can do that, it would defeat the point of

> this thread. Alex is a wizard at his craft

Thanks!

Don't know about wizard tho, but I like things to be complicated...

Re: Rotary valve Peugeot Spx

If this pans out I'll have to start a new thread called "Valveless Peugeot Spx"

Re: Rotary valve Peugeot Spx

WTF!

Re: Rotary valve Peugeot Spx

Alex Degnes Wrote:

-------------------------------------------------------

> WTF!

>

>

I wanna see what happens under load & @ wot? I don't think it's going to work at high revs, the new fuel will never enter the cylider correctly. It will run

Re: Rotary valve Peugeot Spx

I actually think that around peak power rpm is where it should work best without the valve - that's when the system really is in resonance. I wouldn't be too surprised if it made just as much, or even more power than with the valve. Depends on how "right" my intake timing was in the first place.

What really surprised me was that it started right up and kept on running.

The Methanol/nitro mix might have helped cause it's pretty insensitive to afr, as long as you don't run it lean...

We'll find out soon enough!

Re: Rotary valve Peugeot Spx

Alex Degnes Wrote:

-------------------------------------------------------

> I actually think that around peak power rpm is

> where it should work best without the valve -

> that's when the system really is in resonance. I

> wouldn't be too surprised if it made just as much,

> or even more power than with the valve. Depends on

> how "right" my intake timing was in the first

> place.

>

> What really surprised me was that it started right

> up and kept on running.

> The Methanol/nitro mix might have helped cause

> it's pretty insensitive to afr, as long as you

> don't run it lean...

>

> We'll find out soon enough!

Lets say this works, this could be a very crazy discovery. Fuck transfer ports. You should make some e50 cases! Lol

Re: Rotary valve Peugeot Spx

Bump, the Tecumseh 96cc cylinder has a side exhaust with a closed end wrist pin to separate the exhaust port from the intake transfer. CooL. It’s only circlip holding it in

Re: Rotary valve Peugeot Spx

Bump

Re: Rotary valve Peugeot Spx

Tweaker trash /
« Go to Topics — end of thread

Want to post in this forum? We'd love to have you join the discussion, but first:

Login or Create Account