Re: Stretched 103 w/ mono shock project

Full disclosure just a mock up so dont act like about to race with the shit, full mock up situation........ It's all about vision fuckers

20200406_154331.jpg

Re: Stretched 103 w/ mono shock project

I should run that swing arm just cause now lol just to stirrrrrr the pot. Lol this is the better entertainment than tiger king shit on Netflix .... "Just be safe and have fun"

Trust me I'm having fun lol

Re: Stretched 103 w/ mono shock project

This is gonna need a parachute

Re: Stretched 103 w/ mono shock project

Also made some spacers for the inside so shit doesn't bend when we tighten down on the axle. Gonna shit ass weld a bolt on it and make a plate with a hole on the back of the swing arm for a tensioner

IMG_20200407_161252159.jpg
IMG_20200407_161252159.jpg

Re: Stretched 103 w/ mono shock project

Yes parachute that's exactly what I need. Should I mock it up first or just throw it on and hope it works the way it is

Re: Stretched 103 w/ mono shock project

> brent kendrick Wrote:

> -------------------------------------------------------

> Yes parachute that's exactly what I need. Should I mock it up first or

> just throw it on and hope it works the way it is

Well you are fabbing up spacers for a swing arm that is gonna snap in half so fuck it. When in rome

Re: Stretched 103 w/ mono shock project

Hahaha I knew you where gonna say some shit about it lol moped army is so uplifting

Re: Stretched 103 w/ mono shock project

That's probably how we are gonna do the next swing arm so might as well make spacers and other shit till parts show up right, or should I just look at like a dumbass and do nothing

Re: Stretched 103 w/ mono shock project

Naw shit looks good. Wish I had a lathe!

Re: Stretched 103 w/ mono shock project

Tweaker trash /

> Satan 666 Wrote:

> -------------------------------------------------------

> Naw shit looks good. Wish I had a lathe!

Yea il insure those spacers no problem!

Re: Stretched 103 w/ mono shock project

> Barack Obama Wrote:

> -------------------------------------------------------

> > Satan 666 Wrote:

>

> > -------------------------------------------------------

>

> > Naw shit looks good. Wish I had a lathe!

>

> Yea il insure those spacers no problem!

Spacers have nothing to do with the welds. I like them

Re: Stretched 103 w/ mono shock project

I trip out on how these rims are like piece together with rivets kinda crazy how they used to do shit

IMG_20200403_192633_357.jpg

Re: Stretched 103 w/ mono shock project

Rivets are strong and light. Planes and boats have been using them for 75+ years and they have alot more than 7hp pushing them. Very cool

Re: Stretched 103 w/ mono shock project

Tweaker trash /

Yup

Re: Stretched 103 w/ mono shock project

That wheel type is called comstar .

Here's a reverse comstar :

(edited)

Re: Stretched 103 w/ mono shock project

rad, i didnt know the name for those rims... i dug those rim out of my friends shed, never seen them before, or just never noticed how they were put together, but thought they would be dope to put on.

Re: Stretched 103 w/ mono shock project

Tweaker trash /

Your going to need a bigger axle. Wheres the wheel from the swing arm?

Re: Stretched 103 w/ mono shock project

Tweaker trash /

Your going to need a bigger axle or weld the slots up. Wheres the wheel from the swing arm?

Re: Stretched 103 w/ mono shock project

yeah those rims are on my maxi right

but yeah i plan on going bigger and welding a bit of material then shape it to the right size, so theres no play

Re: Stretched 103 w/ mono shock project

Cool let's see some more mock up. I am a fabricator so I like to see shit get done and done with thought. Sorry we got off on the wrong foot. Didn't mean any harm and only wish the best for your build and safety. Jbot can call us names but we just like to see good things built safe. It's called constructive criticism. I love full custom shit so do it right. I dont like to waste material so I tend to overthink things and try and do it one time. U doing a good thing

Re: Stretched 103 w/ mono shock project

Tweaker trash /

> Satan 666 Wrote:

> -------------------------------------------------------

> Cool let's see some more mock up. I am a fabricator so I like to see

> shit get done and done with thought. Sorry we got off on the wrong foot.

> Didn't mean any harm and only wish the best for your build and safety.

> Jbot can call us names but we just like to see good things built safe.

> It's called constructive criticism. I love full custom shit so do it

> right. I dont like to waste material so I tend to overthink things and

> try and do it one time. U doing a good thing

I haven’t hear that word for decades constructive criticism! I don’t waste material because it ends up back in the scrap pile lol

Re: Stretched 103 w/ mono shock project

Yeah I'll keep the thread updated forsure, gonna order that mono shock and see where we gonna stuff it, it's 8inchs eye to eye so should be too hard to get it in there without changing the ride height too much.

Yeah no worries I'm not a soft skin type anyways so I wasn't really offended by anything lol I've been in the trades since I was 18, if that doesn't give you thick skin idk what will

Yeah these french dudes helping me know what the fuck they are doing and I trust they wouldn't send me off on something that's gonna "fold like a napkin" or just fall apart . (edited)

Re: Stretched 103 w/ mono shock project

Tweaker trash /

> brent kendrick Wrote:

> -------------------------------------------------------

> Yeah I'll keep the thread updated forsure, gonna order that mono shock

> and see where we gonna stuff it, it's 8inchs eye to eye so should be too

> hard to get it in there without changing the ride height too much.

>

> Yeah no worries I'm not a soft skin type anyways so I wasn't really

> offended by anything lol I've been in the trades since I was 18, if that

> doesn't give you thick skin idk what will

>

> Yeah these french dudes helping me know what the fuck they are doing and

> I trust they wouldn't send me off on something that's gonna "fold like a

> napkin" or just fall apart .

I highly doubt they even looked at it. If I had one of my mentors look at that he would cut it in half immediately so he could still pass on the trade.

Re: Stretched 103 w/ mono shock project

Believe what you want i don't really care

Re: Stretched 103 w/ mono shock project

Tweaker trash /

> brent kendrick Wrote:

> -------------------------------------------------------

> Believe what you want i don't really care

Well I care about you

Re: Stretched 103 w/ mono shock project

Joe Schuitema /

I suggest additional bracing that will also be a mounting point for the shock. It would also add stiffness to prevent twisting. Where were you going to mount the shock?

Monoshock2l.jpg

Re: Stretched 103 w/ mono shock project

@ Barack Obama (edited)

giphy.gif

Re: Stretched 103 w/ mono shock project

Yeah that's a good idea thanks!!

We have a long way to go but I like that idea , may be I could weld a bar between the seat post and the forks run the shock off the bar and have it connect to brace similar to that (edited)

Re: Stretched 103 w/ mono shock project

Bump this shit.

Re: Stretched 103 w/ mono shock project

Tweaker trash /

Wait till he hits a bump

« Go to Topics — end of thread

Want to post in this forum? We'd love to have you join the discussion, but first:

Login or Create Account