Re: Stock a35 modding.

Jay Rivett /
This single post is part of a larger thread. Start from the top or view this post in context.

> EH FCC of the QCB Wrote:

> -------------------------------------------------------

> Just curious about spacing. I have ported quite a few A35 kits and

> never spaced them. Is the squish really that off or is your kit not

> clearing the ports? Because if everything is open at BDC I would not

> worry about spacing it. You will still have a drastic improvement with

> the porting you are talking about.

Now thinking about it I agree with the not needing to space it. As wouldnt spacing it just increase the squish between the piston and head? Unless you are planning to deck the top of the cylinder down that 1mm.

Not to poo poo on your amazon purchase but you can search clone sha/bing/phbg on here and see how much trouble other folks have with them. End up getting a real one, slapping it on and all problems go away. Sometimes they are ok, but it is a real crapshoot.

This single post is part of a larger thread. Start from the top or view this post in context.

Want to post in this forum? We'd love to have you join the discussion, but first:

Login or Create Account