Difference between revisions of "All Vespa Dimensions"

From Moped Wiki
Jump to: navigation, search
 
Line 32: Line 32:
 
Freewheel nut: 36mm
 
Freewheel nut: 36mm
  
Brakes plate 105mm (The brake plates on both Grande/Bravo front wheels are 105mm, A ciao brake plate is the same 105mm the only difference is where the front end fits into the brake plate. On numerous occasions I’ve used Ciao wheels on Grandes but I did have to use the Grande brake plate. The brakes plates internally are the same the only difference, as I stated earlier, are the exterior front end clips)
+
Brakes plate 105mm (The brake plates on both Grande/Bravo front wheels are 105mm, A ciao brake plate is the same 105mm the only difference is where the front end fits into the brake plate. On numerous occasions I’ve used Ciao wheels on Grandes but I did have to use the Grande brake plate. The brakes plates internally are the same the only difference, as I stated earlier, are the exterior front end clips - Ninja)
  
  
 
[[Category:Vespa/Kinetic]]
 
[[Category:Vespa/Kinetic]]

Latest revision as of 22:20, 17 February 2017

This is a make-it-as-you-go page. I'm starting from memory, so if you find mistakes, help me out.

Engine

Cylinder Studs: M7x120mm

Case Bolts:

Mount Bolts: Two M6 x 120mm and one M6 x 30mm

Transmission

Rear Wheel Bolts: 10mm x 14mm 1.5 thread

Variator and Clutch

Weights: 14mm x 14mm

Variator Nut: 24mm or 17mm

Clutch Retaining Nut:

Clutch Assembly Nut: 24mm

Frame Rear Shock Nut: 17mm nut


Wheels Front Wheel: 17mm nut

Freewheel nut: 36mm

Brakes plate 105mm (The brake plates on both Grande/Bravo front wheels are 105mm, A ciao brake plate is the same 105mm the only difference is where the front end fits into the brake plate. On numerous occasions I’ve used Ciao wheels on Grandes but I did have to use the Grande brake plate. The brakes plates internally are the same the only difference, as I stated earlier, are the exterior front end clips - Ninja)