Bearing and Seal Chart

From Moped Wiki
Revision as of 16:00, 6 August 2010 by Saabsonettguy (talk | contribs)
Jump to: navigation, search

Sizes are given in millimeters.

Puch E50

Bearing

ID Inner Diameter Outer Diameter Width Usage Quantity Notes
6203 C3 17 40 12 Left Crankshaft, Main Gear 2 C3 clearance
6203 NR 17 40 12 Right crankshaft 1 External Snap ring

Seal

ID Inner Diameter Outer Diameter Width Usage Quantity Notes
Double lip 17 40 7 Crankshaft Seals 2
Double lip 22 40 7 Output shaft seal 1

Puch ZA50

ID Inner Diameter Outer Diameter Width Usage Quantity Notes
L17 (FAG) 17 40 10 Magneto side crank bearing
E20 (FAG) 20 47 12 Transmission side crank bearing
6002 (ISO) 15 32 9 Transmission cover crank side
16101 (ISO) 12 30 8 Transmission cover intermediate side
6005 (ISO) 25 47 12 Intermediate shaft main
6203 (ISO) 17 40 12 Output shaft main
HK 1816 (FAG) 18 24 16 Output shaft roller
HK 1612 (FAG) 16 22 12 Second speed gear internals

ISO FAG

Tomos A3

ID Inner Diameter Outer Diameter Width Usage Quantity Notes

Tomos A35/A55

ID Inner Diameter Outer Diameter Width Usage Quantity Notes
6203 C3 17 40 12 Crank main bearings 2 C3 clearance
Needle Roller 12 15 15 Small end connecting rod 1
One way needle bearing Clutch Bell 1
608 8 22 7 Trans Cover Crank support 1
6000 10 26 8 Trans cover Counter shaft support 1
6201 12 32 10 Left Counter shaft support 1
Roller d5 8 Counter shaft gear 1
SCE 109P Driveshaft bearing 1 Needle roller
SCE 108 Driveshaft bearing 1 Needle roller
6206 30 62 16 Driveshaft bearing 1

ISO FAG