Difference between revisions of "Changing Tomos transmission fluid"

From Moped Wiki
Jump to: navigation, search
m (formatting, more tutorials for more engines should be added)
m (stubify)
Line 3: Line 3:
 
==Tomos A35==
 
==Tomos A35==
 
To change gear box oil you drain the plug or bolt at the bottom of the transmission.  The bolt on top of your transmission is for filling.  There is a phillips head screw on the side unlike the allen heads that actually hold on the gearbox cover.  Once you have drained the old oil, and bolted back on the bottom plug, fill new transmission fluid until it leaks out of the side where you have taken the phillips head off.  Many recommend being very careful NOT to strip out the phillips head on the side, as it is not very strong metal.  Use an appropriate sized phillips screwdriver.
 
To change gear box oil you drain the plug or bolt at the bottom of the transmission.  The bolt on top of your transmission is for filling.  There is a phillips head screw on the side unlike the allen heads that actually hold on the gearbox cover.  Once you have drained the old oil, and bolted back on the bottom plug, fill new transmission fluid until it leaks out of the side where you have taken the phillips head off.  Many recommend being very careful NOT to strip out the phillips head on the side, as it is not very strong metal.  Use an appropriate sized phillips screwdriver.
 +
 +
{{stub}}
 +
[[Category: How to...]]

Revision as of 01:29, 17 June 2008

Use type A, or F, Automatic transmission fluid (ATF). You can pick up a bottle at any autoparts store.

Tomos A35

To change gear box oil you drain the plug or bolt at the bottom of the transmission. The bolt on top of your transmission is for filling. There is a phillips head screw on the side unlike the allen heads that actually hold on the gearbox cover. Once you have drained the old oil, and bolted back on the bottom plug, fill new transmission fluid until it leaks out of the side where you have taken the phillips head off. Many recommend being very careful NOT to strip out the phillips head on the side, as it is not very strong metal. Use an appropriate sized phillips screwdriver.

This article is a stub.
You can help the Moped Wiki by expanding it.