Difference between revisions of "Derbi DIY Rear Spring"

From Moped Wiki
Jump to: navigation, search
(yay wikified forum post!)
 
m (Awesomenick moved page DIY Derbi rear spring to Derbi DIY Rear Spring)
 
(No difference)

Latest revision as of 22:16, 6 June 2017

This article is a wikified version of this post from the forums.

This spring was $4.99 at my local hardware store. Made of stainless steel. Great quality. The package says # C-806 from the Centruy spring company, and the measurements are 38.10 × 82.66 × 3.769mm.

Derbi spring 1.jpg

Comparison to stock derbi 3 weight spring:

Derbi spring 2.jpg

Derbi spring 3.jpg

Installed in derbi rear pulley cam:

Derbi spring 4.jpg

Results: In a Metra 80 piston port, it has great low end -- pretty much spot-on with what you would tune a TJT or 6 weight to. I also machine my 3 weight variator cheeks down to allow it to variate further. Didn't loose any top speed from this.