Honda PA Replacement Parts

Replacement Parts

A number of parts remain available - but - it seems that not all local Honda shops can get them. Try these sources:

Western Hills Honda Yamaha

Temecula Motor Sports

Ebay

CDI Unit

The following CDI Units, from other Honda's will fit and work in your Hobbit:

• 1981
  • NA50 Express II
  • NC50 Express
  • NX50M Express
  • PA50II

• 1982
  • NC50 Express
  • NU50 Urban Express
  • NU50M Urban Express Deluxe
  • NX50M Express
  • PA50II

• 1983
  • NC50 Express
  • NU50 Urban Express
  • NU50M Urban Express Deluxe
  • PA50II
  • NH80 Aero

• 1984
  • NN50 Gyro
  • NH80 Aero
  • NH125 Aero

• 1985
  • NH80 Aero

Head Light

DrATV.com has a headlight with a replaceable bulb. Headlight link

Pet Cock

DrATV.com has a petcock. Petcock linlk

Spark Plugs

Courtesy of http://www.itslookingup.com/moped/pa50/tyskpa50.htm

• PA50 1978 to 1981 (Gap 0.024 to .028")
  • NGK BPR-6HS (OEM)
  • Champion RL86C or L86C
  • ND W20FPR
• PA50 1982 to 1983 (Gap .030")
  • NGK BPR-6HS (OEM)
  • Champion RL87YC or L87YC
  • ND W20FPR
• Optional per Owner's Manual (all years): BPR-5HS

Note, the 1983 official factory manual from Honda does specifies resistor-type plugs. It has been reported that other years' manuals do not specify resistor-type plugs. Therefore, the correct spark plugs are NGK BP6HS, BP5HS, and ND W20FP. --mishan

"V" Belt

Courtesy of http://www.itslookingup.com/moped/pa50/tyskpa50.htm

• The OEM belt length measured on the top side (outside diameter) is 41 inches (104.14 centimeters)
• The top and sides of the OEM belt (width) each measures 19/32 inch.
• The bottom width of the OEM belt measures 11/32 inch.

Source	Model	Approx. Price	Comments
Mitsuboshi (OEM)	23100-148-7030	$60.00	Available via Honda dealers
Dayco	#17415 or 13A055	$12.00	It is a 41.5" belt, slightly larger than stock
Goodyear	17425 13AV1080	$16	Available at Shucks Autozone Carquest

• I have tried the Dayco belt, and it does work. However, after a few hundred miles, the belt wore out. I suspect that the belt angle (the angle of the "V") is slightly different. The point --> don't expect a long life with this alternate belt.

Exhaust Gasket

I don't buy Honda parts - I just go to ebay for these. I usually do a search for "50" and "exhaust gasket". As long as the gasket is copper and about 1-1/4" across, it will usually work. Here's a pic from ebay: