Difference between revisions of "Honda PA Tools"

(additional clutch puller info)
Line 2: Line 2:
 
*This tool is available from speedsupplies.com.  At this time of this writing (June 16, 2008), the tool costs $23.  The (Honda) part number is 07933-1480000.
 
*This tool is available from speedsupplies.com.  At this time of this writing (June 16, 2008), the tool costs $23.  The (Honda) part number is 07933-1480000.
 
*Your local Honda motorcycle dealer may have this in stock/available to order for ~$30.
 
*Your local Honda motorcycle dealer may have this in stock/available to order for ~$30.
 +
*Custom make your own
 +
**you will need a large 24mm x 1.5pitch nut.  this is a common fork nut/cap size on modern motorcycles.  weld a piece of pipe that will fit over the crank, it has to be long enough so that you can weld a nut onto the other end and clear the crank.  it will look like this when finished:
 +
 +
[http://www.mopedarmy.com/forums/file.php/6/91901/clutchtool.JPG]
 +
 
*The Flywheel Puller that is made by Motion Pro with the model number 08-0257 works. More info on the package…. M24×1.5 R.H. Internal Thread. It is used for <br/>
 
*The Flywheel Puller that is made by Motion Pro with the model number 08-0257 works. More info on the package…. M24×1.5 R.H. Internal Thread. It is used for <br/>
 
**Honda: 2007-2008 CRF150R, CRF150RB; 2004-2008 CRF250R, CRF250X; and 2002-2008 CRF450R
 
**Honda: 2007-2008 CRF150R, CRF150RB; 2004-2008 CRF250R, CRF250X; and 2002-2008 CRF450R

Revision as of 13:38, 29 August 2012

Clutch Removal (for the drive face (front) or otherwise called a variator and also the rear (driven) pulley)

  • This tool is available from speedsupplies.com. At this time of this writing (June 16, 2008), the tool costs $23. The (Honda) part number is 07933-1480000.
  • Your local Honda motorcycle dealer may have this in stock/available to order for ~$30.
  • Custom make your own
    • you will need a large 24mm x 1.5pitch nut. this is a common fork nut/cap size on modern motorcycles. weld a piece of pipe that will fit over the crank, it has to be long enough so that you can weld a nut onto the other end and clear the crank. it will look like this when finished:

[1]

  • The Flywheel Puller that is made by Motion Pro with the model number 08-0257 works. More info on the package…. M24×1.5 R.H. Internal Thread. It is used for
    • Honda: 2007-2008 CRF150R, CRF150RB; 2004-2008 CRF250R, CRF250X; and 2002-2008 CRF450R
    • Kawasaki: 2004-2008 KX250F; and 2006-2008 KX450F
    • Suzuki: 2004-2007 RMZ250; and 2005-2007 RMZ450
    • Yamaha: 2006-2008 YZ450F

Driven Pulley Removal (rear pulley)

It has been reported that a Motobecane Clutch Removal Tool will also remove A Honda Hobbit rear variator. At the time of this writing (June 16, 2008), the tool is sold at mopedshop.com as item # 5108 for $18. The Honda tool used to remove the front variator (see above) will also remove the rear variator.


Honda PA50 Information
Main ArticleManualsModel InfoModel Differences
Carb/FuelEngineDrivetrainWheels & TiresExhaustElectricalBody and FramePA50I/PA50M PerformanceTroubleshootingPartsTools