Difference between revisions of "Lighting - You Blew It - An Inquiry Into LEDs"
From Moped Wiki
Awesomenick (talk | contribs) |
Awesomenick (talk | contribs) |
||
Line 12: | Line 12: | ||
==Pieces you need that your moped does not have== | ==Pieces you need that your moped does not have== | ||
− | *A regulator /rectifier - Not just a regulator, we will be converting the AC output of the magneto to DC for the LEDs. These can range | + | *A regulator /rectifier - Not just a regulator, we will be converting the AC output of the magneto to DC for the LEDs. These can range the cheap $10 ones to the Trail Tech (7004-RR150) or higher. We will be using the Trail Tech (7004-RR150) in this guide. |
− | the cheap $10 ones to the Trail Tech (7004-RR150) or higher. We will be using the Trail Tech (7004-RR150) in this guide. | ||
*Headlight Lens - If you have a sealed headlight you will need to change to a replaceable bulb type, usually fits a 1156 BA15s bulb. | *Headlight Lens - If you have a sealed headlight you will need to change to a replaceable bulb type, usually fits a 1156 BA15s bulb. | ||
*LEDs - You can find ones that fit in your current moped fixtures. Headlight bubs are ''usually'' a 1156 BA15s bulb. Taillights are ''usually'' a single 1157 BA15d bulb or two 63 BA15s bulbs. Check yours before you order. | *LEDs - You can find ones that fit in your current moped fixtures. Headlight bubs are ''usually'' a 1156 BA15s bulb. Taillights are ''usually'' a single 1157 BA15d bulb or two 63 BA15s bulbs. Check yours before you order. |
Revision as of 18:11, 25 July 2017
Work in progress... Just setting up outline.
The goal of this guide is to outline the process of converting a stock moped electrical system to a LED system.
A guide to safe and bright lights.
You blew it! Now what?
Tools Required
- Soldering Iron
- Solder
- A way to remove the magneto
- Pliers
Pieces you need that your moped does not have
- A regulator /rectifier - Not just a regulator, we will be converting the AC output of the magneto to DC for the LEDs. These can range the cheap $10 ones to the Trail Tech (7004-RR150) or higher. We will be using the Trail Tech (7004-RR150) in this guide.
- Headlight Lens - If you have a sealed headlight you will need to change to a replaceable bulb type, usually fits a 1156 BA15s bulb.
- LEDs - You can find ones that fit in your current moped fixtures. Headlight bubs are usually a 1156 BA15s bulb. Taillights are usually a single 1157 BA15d bulb or two 63 BA15s bulbs. Check yours before you order.
Preparing the Stator
Requires complete removal of the stator.