Difference between revisions of "Modify stock a55 exhaust"

From Moped Wiki
Jump to: navigation, search
(pics)
Line 1: Line 1:
[[Image:1_20141124_194139300.jpg]]
+
starting from the rear of the pipe, there should be a ridge between the first weld line and the first heat shield mount. you need to cut the pipe on both sides of the ridge to remove that clogged cat converter.
 +
 
 +
cut on the rear edge of the ridge, stay very close to save the rear cone thats hidden inside the pipe
 +
[[Image:1 20141124 194139300.jpg]]
 +
 
 
[[Image:2 20141124 200935544.jpg]]
 
[[Image:2 20141124 200935544.jpg]]
 
[[Image:333 20141124 200327557.jpg]]
 
[[Image:333 20141124 200327557.jpg]]

Revision as of 21:45, 24 November 2014

starting from the rear of the pipe, there should be a ridge between the first weld line and the first heat shield mount. you need to cut the pipe on both sides of the ridge to remove that clogged cat converter.

cut on the rear edge of the ridge, stay very close to save the rear cone thats hidden inside the pipe 1 20141124 194139300.jpg

2 20141124 200935544.jpg 333 20141124 200327557.jpg