Modify stock a55 exhaust

From Moped Wiki
Revision as of 21:45, 24 November 2014 by Deathplaybanjo (talk | contribs)
Jump to: navigation, search

starting from the rear of the pipe, there should be a ridge between the first weld line and the first heat shield mount. you need to cut the pipe on both sides of the ridge to remove that clogged cat converter.

cut on the rear edge of the ridge, stay very close to save the rear cone thats hidden inside the pipe 1 20141124 194139300.jpg

2 20141124 200935544.jpg 333 20141124 200327557.jpg