Difference between revisions of "Mounting the 15/15 Sha Dellorto with a shorty intake on the Motobecane /50L/50V"

From Moped Wiki
Jump to: navigation, search
Line 1: Line 1:
'''You do not need the long intake manifold to mount the Sha 15/15 Dellorto, on this red A model 50V, I used the big 15mm shorty. This ped will do 35mph''' '''It will fit right on the shorty intake made for the 12 mm Gurtner carb'''
+
'''You do not need the long intake manifold to mount the Sha 15/15 [[Dellorto]], on this red A model 50V, I used the big 15mm shorty. This ped will do 35mph''' '''It will fit right on the shorty intake made for the 12 mm Gurtner carb'''
 
'''The advantage is, it will not hit the bottom of the fuel tank when the engine is in the up position at full throttle'''
 
'''The advantage is, it will not hit the bottom of the fuel tank when the engine is in the up position at full throttle'''
 
'''Also, there is no need to customize the throttle assembly, the slide will go all the way up and down with the stock grip, this is true for the 77/78/79  50L/50V models .''''' Mabecane1978''
 
'''Also, there is no need to customize the throttle assembly, the slide will go all the way up and down with the stock grip, this is true for the 77/78/79  50L/50V models .''''' Mabecane1978''
Line 9: Line 9:
  
  
''''''You can also use the shorty from a 10mm Gurtner carb setup to install the15/15 Sha Dellorto on a B(25mph) Model 50V, you have to use the insert that comes off the 10mm Gurtner carburetor so the Dellorto will fit right on the 10mm shorty. '''The Dellorto will make the moped go just over 30mph'''
+
''''''You can also use the shorty from a 10mm[[ Gurtner]][[Link title]] carb setup to install the15/15 Sha Dellorto on a B(25mph) Model [[50V]], you have to use the insert that comes off the 10mm Gurtner carburetor so the Dellorto will fit right on the 10mm shorty. '''The Dellorto will make the moped go just over 30mph'''
 
'''
 
'''
  
Line 15: Line 15:
  
  
'''Here is a shorty for that fits the Dellorto 15/15 Sha'''
+
'''Here is a shorty for that fits the Dellorto 15/15 Sha for a [[Motobecane]]'''
  
  
  
 
[[Image:HPIM1018.JPG]]
 
[[Image:HPIM1018.JPG]]

Revision as of 07:02, 18 August 2007

You do not need the long intake manifold to mount the Sha 15/15 Dellorto, on this red A model 50V, I used the big 15mm shorty. This ped will do 35mph It will fit right on the shorty intake made for the 12 mm Gurtner carb The advantage is, it will not hit the bottom of the fuel tank when the engine is in the up position at full throttle Also, there is no need to customize the throttle assembly, the slide will go all the way up and down with the stock grip, this is true for the 77/78/79 50L/50V models . Mabecane1978

HPIM1026.JPG


HPIM1027.JPG


'You can also use the shorty from a 10mmGurtnerLink title carb setup to install the15/15 Sha Dellorto on a B(25mph) Model 50V, you have to use the insert that comes off the 10mm Gurtner carburetor so the Dellorto will fit right on the 10mm shorty. The Dellorto will make the moped go just over 30mph'

HPIM1006.JPG


Here is a shorty for that fits the Dellorto 15/15 Sha for a Motobecane


HPIM1018.JPG