Difference between revisions of "Parts crossover"

From Moped Wiki
Jump to: navigation, search
Line 19: Line 19:
 
===Cylinder===
 
===Cylinder===
 
*Tomos a35 and Puch e50/za50 top ends are swappable.
 
*Tomos a35 and Puch e50/za50 top ends are swappable.
 +
*Minarelli pistons will work in a Demm cylinder.
 
*Yamaha QT-50 rings are the same dimensions and ring end type as those used on MotoGuzzi/Benelli and some Garelli pistons.
 
*Yamaha QT-50 rings are the same dimensions and ring end type as those used on MotoGuzzi/Benelli and some Garelli pistons.
 
*40mm X 2mm FG Garelli rings will fit a Casal or a Zundapp 49 cc motor.
 
*40mm X 2mm FG Garelli rings will fit a Casal or a Zundapp 49 cc motor.

Revision as of 20:50, 15 February 2007

Moped Parts Crossover

This crossover chart was formed to help provide a list of compatible parts between brands and models. If you come across any incorrect information please update the list.

Fuel system

  • Yamaha qt50 and Honda nc50 fuel valves will fit general 5 star and lazer top tanks.
  • Peugeut petcocks fit Batavus VA & HS50,and Puch Magnum gas tanks.
  • Tomos fuel valve fits JcPenney pinto and swinger models.
  • Puch bing jets fit Tomos and Batavus encarwi carburetors.
  • Tomos bullet and ttlx top tank gas caps fit JcPenney pinto and swinger models.
  • Tomos and Puch Gas caps are interchangable.
  • Vespa Dellorto SHA carburetors (12:9, 12:10, 12:12, and 13:13) are a direct fit on Batavus (encarwi) intakes

Intake

  • The Puch polini intake will fit tomos A35 cylinders.
  • Minarelli intakes will fit puch cylinders.
  • A Daelim intake will fit the tomos a35 and puch polini cylinders.
  • Rubber brake switch boots work as intake reducers for Dellorto airbox holes.

Cylinder

  • Tomos a35 and Puch e50/za50 top ends are swappable.
  • Minarelli pistons will work in a Demm cylinder.
  • Yamaha QT-50 rings are the same dimensions and ring end type as those used on MotoGuzzi/Benelli and some Garelli pistons.
  • 40mm X 2mm FG Garelli rings will fit a Casal or a Zundapp 49 cc motor.

Lighting

  • Most moped Head lights and tail lights are cross compatible between brands.
  • 6v 5" sealed beam bulbs are found on small tractors and can be found at tractor supply and autoparts stores.
  • The Sachs 3 wire stator fits puch.
  • Tomos lighting coils will fit puch stator stators.
  • The Sylvania H5006 bulb will fit in the Honda MB5 headlight canister.

Exhaust

  • Many Puch exhausts will fit Minarelli powered bikes with little modification.

Engine Parts

  • Tomos A3 and A35 crank seals are the same as Sears Allstate Compact (Puch DS60)