Difference between revisions of "Puch bearings"
Awesomenick (talk | contribs) |
|||
| (One intermediate revision by one other user not shown) | |||
| Line 1: | Line 1: | ||
{{TOCright}} | {{TOCright}} | ||
| − | A list of [[bearings]] and [[seals]] needed to [[Rebuild a Puch E50 Engine|rebuild a Puch E50 engine]], divided by [[crank]]. (See [[Puch E50 Crankshafts]] for more information on the different crankshafts). | + | A list of [[bearings]] and [[seals]] needed to [[Rebuild a Puch E50 Engine|rebuild a Puch E50 engine]], divided by [[crank]]. (See [[Puch E50 Crankshafts]] for more information on the different crankshafts). Also the [[Bearing and Seal Chart]] for a more comprehensive list and different makes and models. |
| + | |||
==Stock, DMP Stuffed/Unstuffed, Super Stuffy, Rito== | ==Stock, DMP Stuffed/Unstuffed, Super Stuffy, Rito== | ||
| Line 13: | Line 14: | ||
*one 1 X 22x40x7 Double lipped | *one 1 X 22x40x7 Double lipped | ||
| − | + | ==Austro-Daimler One Speed== | |
| − | + | ===Bearings=== | |
| − | *1 - 17x26x6 | + | |
| + | *3 - 6203 C3 | ||
| + | *1 - 6203 NR | ||
| + | |||
| + | ===Seals=== | ||
| + | *2 - 17x40x7 Double Lipped | ||
| + | *1 - 17x40x7 Single Lipped | ||
| + | *1 - 17x26x6 Single Lipped | ||
==Top Racing== | ==Top Racing== | ||
Latest revision as of 12:33, 5 January 2017
A list of bearings and seals needed to rebuild a Puch E50 engine, divided by crank. (See Puch E50 Crankshafts for more information on the different crankshafts). Also the Bearing and Seal Chart for a more comprehensive list and different makes and models.
Stock, DMP Stuffed/Unstuffed, Super Stuffy, Rito
The complete list of Puch E50 bearings and seals for the stock crank, the DMP stuffed/unstuffed crank, the Treats Super Stuffy crank, and the Rito crank is:
Bearings
- 3 X 6203 C3 (two counter shaft bearings optional)
- 1 X 6203 NR
Seals
- two 2 X 17x40x7 Double lipped
- one 1 X 22x40x7 Double lipped
Austro-Daimler One Speed
Bearings
- 3 - 6203 C3
- 1 - 6203 NR
Seals
- 2 - 17x40x7 Double Lipped
- 1 - 17x40x7 Single Lipped
- 1 - 17x26x6 Single Lipped
Top Racing
Bearings and seals needed for the The Top Racing Crank:
Bearings
- 1 X 6203 ST 17x22x12 (outer race) 11mm inner race -Clutch side snap ring
(-or a 6203 NR with the clutch side circlip slot machined 1mm further)
- 3 X 6203 C3
Seals
- three 17x40x7 seals (and zero 22x40x7 seals)
Where To Buy
Allied Bearings Corporation
3525 W Lincoln Ave
Milwaukee, WI 53215
(414) 672-3111
http://www.alliedbearingcorp.com/
Crush Bearings & Drives Inc.
325 Baxter Avenue
Louisville, KY 40204
Ph: 502-589-3239
Ph: 800-573-2359
Fax: 502-568-6590
http://www.crushbearings.com/
Action Bearing Company
201 Brighton Avenue
Allston, MA 02134
Ph: 617-782-1400
http://www.actionbearing.com/
