Tomos A55 Performance
As ive been told to do by some people, I'm making a wiki for Tomos A55 parts, and as they come out i will update the page. So here it is:
This kit will fit the 2007 and up Tomos A55 motor that has 2 bolts holding on the intake manifold. If your moped has 4 bolts holding on the intake manifold to the cylinder is our reed valve cylinder kit part #505040 (does not come with wrist pin bearing). If bought, I recommend the 17.5 Dellorto PHVA carb to get power out of this kit. $180
New! Technigas Next R Show Chrome Exhaust system with blue silencer. Fits 2007 Tomos Streetmate and Revival Ts with A55 motors. $170
New performance package for the Streetmate, Revival and Revival TS with A55 engines. High flow performance exhaust, 28 tooth rear sprocket and a #56 fuel jet designed to deliver higher performance from your A55 engine. $170
Daddy Torque sprocket Tomos 28 tooth rear sprocket. $25 (can also go 24,22 and 27 front)
Must bend header to fit also a spacer from the original bracket. $88
there also is a Techno exhaust out for the A55 stevesmoped has them, not sure on a price
Very high flow air filter. This is the best filter i have used on my bikes. Very good flow, and keeps the dirt out. Use this with a Dellorto PHBG carb, and you will feel the difference. $15
A55 Carburetor Speed Kit Upgrade $29.00 This is everything you need to upgrade your new Tomos A55 Sprint, St, LX, Revival, Arrow, and Streetmate.
Use this in conjunction with a new performance pipe, and a 22 tooth rear sprocket.
- Larger Infuser
- Larger Idle Jet
- Larger Main Jet
- UNI Pod Air Filter
Performance carburetor for the A55 cylinder kit. Must use stock choke, comes with jet #65 – $109.95
Adapter bracket for 2007 Tomos A55 Technigas R performance exhausts. Converts the 2 hole mount on the moped to the single mount on the Technigas R exhaust. Also drops the mount to the proper height and angle of the Technigas R A55 pipes.
Exhaust bracket to mount a performance exhaust to the new A55 frame. With this a 2 piece biturbo fill fit, but will still have to bend header and maybe a spacer
These are the larger 6mm Dellorto mainjets used on the PHVA carburetors found on the new Tomos A55. #56-#90