Changes

Line 13: Line 13:  
==Early Early Puch 1973 2 coil (3-wire)==
 
==Early Early Puch 1973 2 coil (3-wire)==
 
[[Image:Maxi VS50 3wire wiring diagram.png|800px|3-wire diagram for really early Puchs]]
 
[[Image:Maxi VS50 3wire wiring diagram.png|800px|3-wire diagram for really early Puchs]]
 +
 +
A) Light out B) Dim light C) Full beam D) Buzzer (horn) E) Short button (kill switch)
 +
1) Headlamp 2) Multifunction control 3) Magneto 4) Spark plug 5) Tail lamp 6) Buzzer (horn)
 +
Schwarz- Black, Gelb- Yellow, Grau- Grey, Weiss- white
 +
Horn wire from 'H' in the multifunction control to the horn is magenta
    
IMPORTANT NOTE: The green/red (not shown on the diagram which is otherwise accurate) and the yellow wires leaving the magneto should be twisted together and put into the terminal block together. The wire continues as yellow only. The other wire colours meeting at the terminal block are black to black and grey to grey.
 
IMPORTANT NOTE: The green/red (not shown on the diagram which is otherwise accurate) and the yellow wires leaving the magneto should be twisted together and put into the terminal block together. The wire continues as yellow only. The other wire colours meeting at the terminal block are black to black and grey to grey.